Acrylic fire-retardant joint sealant
For detailed information, other images and documents, please select individual articles from the following table.
Acrylic fire-retardant joint sealant
Ready-to-use acrylic sealant to close connecting joints between structural and installed parts
Exclusively for trade customers
Register now and access more than 125,000 products
Variants
Exclusively for trade customers
Register now and access more than 125,000 products
- Designed for easy use on construction sites
- Building material class B2
- Neutral odour
- Resists ageing and weathering
- Good UV resistance
- Colour: White, similar to RAL 9003
- Halogen-free
- Silicone-free
Notice
- The surface must be dry, capable of bearing loads and free of dust or grease
Pre-treat absorbent surfaces with diluted sealing compound (one to four parts water to one part acrylic fire-retardant joint sealant)
- The sealant must only be subject to two-side adhesion
- Calculate the joint width to joint depth ratio in accordance with DIN 18540
- Clean tools with water immediately after use
Fresh sealant can be removed using a damp cloth.
- Observe general construction test certificate ABP no. P-3786/243/11-MPA BS for use in classified fire protection joints
General construction test certificate MPA Braunschweig P-3786/243/11-MPA BS
Application area
For use in the system [G] + J1
- Pipe partition E [G]
- Joint system A J1
- Sealing system for construction joints with low expansion load
- F 30-F 90 in accordance with DIN 4102 part 2
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!