For detailed information, other images and documents, please select individual articles from the following table.
Wind brace band tensioning system BL-WRB
For quick and easy installation of AT wind brace bands in widths 40 mm and 60 mm.
Register now and access more than 125,000 products
Variants
Register now and access more than 125,000 products
Steel, blue galvanised
Application:
- For wind brace bands AT of widths 40 and 60 mm
- For rafters with widths between 60 and 100 mm
Benefits:
- Clip-on locking system for quick and easy assembly
- Easy to install even in cold weather
- Large range
- Easy retightening
- Simple measurement
- Approval of the ASSY 3.0 joist hanger screw for hardwood in accordance with ETA-11/0190 means it is also ideal for refurbishments.
Combinable components:
- Clip for connecting the ends of two wind brace bands
- Tensioner for use between two bands or for connecting to the anchor plate
- Anchor plate connection not suitable for tensioning
- Anchor plate for connecting to the rafter (60–100 mm)
- Butterfly for connecting both sides of the wind brace band (rafter width 60, 80 or 100 mm)
The ETA-15/0043 and ETA-11/0190 specifications must be observed.
Available work documents:
Load tables and detailed processing instructions can be found on the service page www.wuerth.de/holzverbinder.
Correct, rapid installation of wind bracing in roofs or wall elements, using wind brace bands.
- Attachment of anchor plates to rafter with 6 + 6 ASSY 3.0 joist hanger screws, 5 x 40 mm.
- Assembly of wind brace band connections on anchor plates (1 clamping device and 1 anchor plate connection per strut).
- Laying of wind brace band AT in the connection device and fastening of the securing flaps.
- Clamping of the wind brace band by shortening the clamping device by turning the metric screw.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!