Thermofix TF1 installation sleeve
For detailed information, other images and documents, please select individual articles from the following table.
Thermofix TF1 installation sleeve
Easy installation - no expensive special tools are required and the secure hold is guaranteed in all common ETICS exterior façades
Exclusively for trade customers
Register now and access more than 125,000 products
Variants
Exclusively for trade customers
Register now and access more than 125,000 products
- Quick installation - simply screw in manually
- Two screw-in aids with pre-determined breaking points
- Thermal-bridge-free installation
- Mounting edge with dia. 3 mm openings for mounting lights, cameras etc.
Notice
High pull-out forces in all common insulation:
- Up to 15 kg in EPS insulation
- Up to 40 kg in wood-fibre insulation
- Up to 9 kg in mineral-wool insulation
Application area
Thermal-bridge-free installation of sockets, switches (in conjunction with standard HW device boxes, dia. 68 mm) as well as lighting etc. in all common ETICS insulation (exterior façade).
Instructions
- Create a milling hole dia. 74 mm in the ETICS insulation using a standard hole saw
- Screw the Thermofix installation sleeve into the milling hole using the two screw-in aids located opposite
- Screw the HW device box dia. 68 mm into the installation sleeve
- Remove/break the two screw-in aids from the installation sleeve
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!