W.TEC® INSERT COIL helical insert screw-in tool - manual installation tool
For detailed information, other images and documents, please select individual articles from the following table.
W.TEC® INSERT COIL helical insert screw-in tool - manual installation tool
Manual tool for screwing in wire thread inserts
Exclusively for trade customers
Register now and access more than 125,000 products
Variants
Exclusively for trade customers
Register now and access more than 125,000 products
Instructions1. Engage the drive tang of the wire thread insert using the groove of the screw-in tool.
2. Apply light pressure to screw the thread insert into the receiving thread until it sits 1/4 to 1/2 rotations below the surface. The adjusting ring on the tool can be set to prevent the thread insert being screwed in too deeply.
Caution: Do not turn against the direction of rotation as this risks breaking the tang.
2. Apply light pressure to screw the thread insert into the receiving thread until it sits 1/4 to 1/2 rotations below the surface. The adjusting ring on the tool can be set to prevent the thread insert being screwed in too deeply.
Caution: Do not turn against the direction of rotation as this risks breaking the tang.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!