Welcome to Würth Aerospace Solutions For trade customers only
Tile adhesive CERAfix® 412-2 C2 TE Flex

For detailed information, other images and documents, please select individual articles from the following table.

Tile adhesive CERAfix® 412-2 C2 TE Flex

White, hydraulically hardened, plastic-coated natural stone mortar in accordance with EN 12004 C2 TE

See product details

Available in 1 version

Prices for customers after login

Exclusively for trade customers

Register now and access more than 125,000 products

Variants

Exclusively for trade customers

Register now and access more than 125,000 products

Call customer service:

Prices for customers after login

Flexible


Secure even on surfaces subject to considerable movement



For multiple applications


Suitable for thin bed and medium bed mortars



White tile adhesive, specifically for natural stone


Adhesive bed does not show through with white marble



Excellent stability and high degree of initial adhesion


  • The positioned tiles adhere immediately, but can still be moved

  • Secure bonding of large and heavy tiles


Resistant to thawing/freezing alternations


  • Suitable for indoor and outdoor use

  • Can be used in wet rooms and swimming pools exposed to high stresses


  • Supple, therefore easy to apply

  • Resistant to ageing

  • Suitable for underfloor heating
Notice
  • Protect the setting product from solar radiation, draughts, driving rain, frost and excessively high temperatures (≥ +25 °C).

  • Do not allow it to come into contact with pre-compressed sealing tapes.

  • Material that is already setting must not be subsequently diluted with water.

  • There are numerous causes of discolouration in natural stone. The occurrence of such can never be absolutely ruled out. For this reason, it is essential to prepare test surfaces on critical substrates or in case of doubt. Please also note that the properties of natural materials can vary greatly between batches.

  • The product has an alkaline reaction to moisture.

  • This product is low-chromate in accordance with directive 2003/53/EC

Tested in line with EN 12004 C2 TE


  • Fire behaviour: A1/A1fl

  • Adhesive tensile strength after dry storage: ≥ 1 N/mm²

  • Adhesive tensile strength after immersion in water: ≥ 1 N/mm²

  • Adhesive tensile strength after heat storage: ≥ 1 N/mm²

  • Adhesive tensile strength after freeze/thaw alternating load: ≥ 1 N/mm²

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. We do not assume any liability for a specific application result due to the large number of applications and storage and processing conditions. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and carry out further development.