For detailed information, other images and documents, please select individual articles from the following table.
Upgrade set for the Original Prusa XL
A practical upgrade set to upgrade the Original Prusa XL 3D printer from two tool heads to five tool heads
Register now and access more than 125,000 products
Variants
Register now and access more than 125,000 products
Scope of delivery
XL Dual-Tool Nextruder upgrade from two tool heads to five tool heads
- 3x XL Multi-Tool Nextruder (with 0.4 mm nozzle)
Including spool holder and Prusa Nextruder sock
- 1x XL electronic expansion set
- XL splitter board
- Additional power supply
- 2x 0.4 mm nozzle (for existing Nextruders)
To upgrade the XL with additional print heads, make sure that you have the tools listed below available. These are part of the Original Prusa XL package and should already be at your disposal.
Tools required for installation
- Mini wrench - used to calibrate the dock and can be replaced with a small slotted screwdriver if required
- Universal wrench - used to calibrate the dock
- PH2 screwdriver - a standard PH2 screwdriver is required for the clamping screws
Needle-nose pliers - T10 key - at least 71 mm long
- 2.5 mm hex key - at least 86 mm long, as thin as possible due to space limitations
- 3.0 mm hex key - at least 128 mm long
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!