pias® drilling screw, countersunk head Steel zinc flake, AW drive
For detailed information, other images and documents, please select individual articles from the following table.
pias® drilling screw, countersunk head Steel zinc flake, AW drive
Exclusively for trade customers
Register now and access more than 125,000 products
Variants
Exclusively for trade customers
Register now and access more than 125,000 products
Drilling, threading, screwing-in — all in one step
Therefore considerably reduced time and effort
Precise bore diameter in each screw connection
- Therefore minimises thread tolerance
- Always an optimal connection
Prevents installation errors
AW drive system
- Optimal torque transmission
- Longer service life
- Optimum centring
- Better mounting output thanks to fatigue-free screwing-in; the required contact pressure for transmission of the torques is considerably lower
- Largest possible contact surface of bit in screw drive
- Even force distribution prevents damage to the surface-protection coating and therefore ensures better resistance to corrosion
Notice
- Contact pressure during use approx. 250 N, screw in with depth stop if necessary
- Drilling screws must be processed with a suitable drill driver (e.g. cordless drill driver with depth stop)
- The use of impact screwdrivers is not permitted
- Drilling screws must be attached perpendicular to the surface of the component
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!