Profile anchor
Profile anchor
PRFLANC-159X35X30X9X4MM
Register now and access more than 125,000 products
- Tensile strength Rm ≥ 330 N/mm²
- Breaking elongation A80 ≥ 19%
- Sheet metal hot-dip galvanised on both sides (S250GD + Z275 [approx. 20 µm])
- Application in utilisation classes 1 and 2 in line with EN 1995:2013
CE marking in line with EN 14545:2009-02
Attach on both sides. If arranged on one side only, a reduction in permissible load must be expected unless the beam is secured against twisting.
The minimum timber width depends on the selected fasteners. It should be at least 80 mm when using nails with a standard length of 40 mm. Nails should be distributed across the entire surface. Nail and bolt edge clearance must be adhered to in line with EC5 or the corresponding approval. Diameter of bolt/screw may only be max. 2 mm smaller than the diameter of the hole.
Available work documents:
Load tables and detailed processing instructions can be found on the service page www.wuerth.de/holzverbinder.
CE marking in line with EN 14545:2009-02
Datasheets(X)
For attaching/securing against wind suction of wooden beams, battens or purlins to profile rails (e.g. Halfen rails).
Type 1 = for Halfen rail type 28/15
Type 2 = for Halfen rail types 38/17 and 40/22
Suitable fasteners:
- Comb/ribbed nails in line with EN 14592: 4.0 x ≥ 40 mm
- ASSY joist hanger screw in line with ETA 11/0190: 4.0 x ≥ 40 mm
- ASSY 3.0 combination screw in line with ETA 11/0190: d = 12 mm
- Bolts in accordance with manufacturer's specifications: M12
Height x width (H x B) | 159 x 35 mm |
Thickness | 4 mm |
Rail type | 38/17 (40/42) |
Number of D 5 mm holes | 8 PCS |
Number of D 13 mm holes | 1 PCS |
Weight | 150 g |
Approval | EN 14545:2009-02 |
Min. tensile strength Rm | 330 N/mm² |
Min. breaking elongation A80 | 19 % |
Material | Steel |
Material designation | S250GD |
Surface | Hot dip galvanized |
Characteristic load-bearing capacities in kN for Würth profile anchor and EH anchor | |||||
Profile anchor | |||||
EH anchor | |||||
Article number | Length x width | Strength | Holes d = 5 mm | Holes d = 13 mm | Nt,Rd (net steel cross section) |
0681 135 40 | 135 x 40 mm | 4 mm | 6 pcs | 23.76 kN | |
0681 175 40 | 175 x 40 mm | 4 mm | 10 pcs | 2 pcs | 23.76 kN |
Article number | Height x width | Strength | Holes d = 5 mm | Holes d = 13 mm | Nt,Rd (net steel cross section) |
0681 108 35 | 108 x 35 mm | 3 mm | 6 pcs | 7.84 kN | |
0681 158 35 | 158 x 35 mm | 3 mm | 11 pcs | 7.84 kN | |
0681 159 35 | 159 x 35 mm | 4 mm | 8 pcs | 1 piece | 16.16 kN |
0681 198 35 | 198 x 35 mm | 3 mm | 5 pcs | 12.12 kN | |
Notes: • Design according to EN 14545 and EN 1995-1-1:2004# • Verification of the nail connection can be carried out with the tables on page 61 |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!