Profile anchor
Profile anchor
PRFLANC-198X35X22,5X8X3MM
Register now and access more than 125,000 products
- Tensile strength Rm ≥ 330 N/mm²
- Breaking elongation A80 ≥ 19%
- Sheet metal hot-dip galvanised on both sides (S250GD + Z275 [approx. 20 µm])
- Application in utilisation classes 1 and 2 in line with EN 1995:2013
CE marking in line with EN 14545:2009-02
Attach on both sides. If arranged on one side only, a reduction in permissible load must be expected unless the beam is secured against twisting.
The minimum timber width depends on the selected fasteners. It should be at least 80 mm when using nails with a standard length of 40 mm. Nails should be distributed across the entire surface. Nail and bolt edge distance must be adhered to in line with EC5 or the corresponding approval. Diameter of bolt/screw may only be max. 2 mm smaller than the diameter of the hole.
Available work documents:
Load tables and detailed installation instructions can be found on the service page www.wuerth.de/holzverbinder
CE marking in line with EN 14545:2009-02
For attaching/securing against wind suction of wooden beams, battens or purlins to profile rails (e.g. Halfen rails).
Type 1 = for Halfen rail type 28/15
Type 2 = for Halfen rail types 38/17 and 40/22
Suitable fasteners:
- Ring shank nails in line with EN 14592: 4.0 x ≥ 40 mm
- ASSY joist hanger screw in line with ETA 11/0190: 4.0 x ≥ 40 mm
- ASSY 4.0 Combi in accordance with ETA 11/0190: d = 12 mm
- Bolts in line with manufacturers' specifications: M12
 | |
Height x width (H x B) | 198 x 35 mm |
Thickness | 3 mm |
Rail type | 28/15 |
Number of D 5 mm holes | 15 PCS |
Weight | 142 g |
Approval | EN 14545:2009-02 |
Min. tensile strength Rm | 330 N/mm² |
Min. breaking elongation A80 | 19 % |
Material | Steel |
Material designation | S250GD |
Surface | Hot dip galvanized |
| Characteristic load-bearing capacities in kN for Würth profile anchor and EH anchor | |||||
| Profile anchor | |||||
| Article number | Height x width | Strength | Holes d = 5 mm | Holes d = 13 mm | Nt,Rd (net steel cross section) |
| 0681 108 35 | 108 x 35 mm | 3 mm | 6 pcs | 7.84 kN | |
| 0681 158 35 | 158 x 35 mm | 3 mm | 11 pcs | 7.84 kN | |
| 0681 159 35 | 159 x 35 mm | 4 mm | 8 pcs | 1 piece | 16.16 kN |
| 0681 198 35 | 198 x 35 mm | 3 mm | 5 pcs | 12.12 kN | |
| EH anchor | |||||
| Article number | Length x width | Strength | Holes d = 5 mm | Holes d = 13 mm | Nt,Rd (net steel cross section) |
| 0681 135 40 | 135 x 40 mm | 4 mm | 6 pcs | 23.76 kN | |
| 0681 175 40 | 175 x 40 mm | 4 mm | 10 pcs | 2 pcs | 23.76 kN |
| Notes: • Design according to EN 14545 and EN 1995-1-1:2004# • Verification of the nail connection can be carried out with the tables on page 61 | |||||
Datasheets (0)
Certificates/ Documents (0)
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Jacket Planam Highline
Hexagonal bolt
Special drill bit For COLDMELT® anchor
Aluminium clip
Screw-in tool, self-tapping
Battery terminal protector
Connecting technology
Identification rings, PVC
Union nut For pneumatic brake systems
Hexagonal bolt with thread up to head for pressure container construction DIN EN ISO 4017, A2 stainless steel
