Profile system
Profile system WAPS series, B
PRFLSYS-SB-ALU-ELO-FL10-L-45X90X90X6060
Register now and access more than 125,000 products
WAPS® The Würth aluminium profile system
The Würth aluminium profile system (abbreviated: WAPS®) offers a wide range of different profile versions. All profiles are anodised and feature coordinated series-specific grid dimensions for perfect combination with each other. There is no sector in which the Würth aluminium profile system cannot be used.
Advantages of WAPS®
- Compatible with Bosch (SB) with the grooves 6, 8 and 10
- Over 150 profile variations
- Wide range of grid sizes from 20 to 60 mm
- Available lengths (depending on profile): 2000, 3000 or 6000 mm
- Practical packaging units
- Compatible with CLIP-O-FLEX® – the flexible suspension system
Datasheets(X)
 | |
Profile width | 45 mm |
Profile height | 90 mm |
Groove width | 10 mm |
Length | 6060 mm |
Material | Aluminium |
Surface | Anodised |
Min. coating thickness | 10 µm |
Max. coating thickness | 15 µm |
Profile surface | 21.01 cm² |
Core hole diameter | 10 mm |
Min. tensile strength Rm | 245 N/mm² |
Min. elasticity limit (Rp 0.2 value) | 195 N/mm² |
Brinell hardness, HB | 75 HB |
Longitudinal moment of inertia | 100.56 cm⁴ |
Transverse moment of inertia | 203.33 cm⁴ |
Section modulus Y-axis | 29.34 cm³ |
Section modulus X-axis | 29.34 cm³ |
Breaking elongation A5 | 10 % |
Breaking elongation A10 | 8 % |
Elasticity modulus at 100% | 70000 N/mm² |
Design of the aluminium profile | Lightweight design |
Last viewed
Stud with threaded end ≈ 2d
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
Protective glove, winter
Cash balance
Solid carbide contour miller, plastic, with spur cut
EPS profile thumbturn cylinder
Cylindrical pin, unhardened
Ring trestle QC 10
Wega® safety goggles
Die holder DIN EN 22568 Performance