Chemical protective glove Ansell AlphaTec 58-735
Chemical protective glove Ansell AlphaTec 58-735
GLOV-ANSELL-ALPHA-TEC-58-735-SZ11
Register now and access more than 125,000 products
- Nitrile barrier provides effective protection against many commonly used chemicals
- INTERCEPT™ Cut Resistance Technology for cut protection at ISO C level
- The ANSELL GRIP™ technology for handling wet or oily parts increases dexterity, a secure grip and wearing comfort
- Enhanced features: The highly visible lining indicates if the outer layer is damaged and warns the user, while the foldable cuff prevents chemicals from running down the arm.
- Mixing chemicals
- Sampling chemicals/liquids/substances
- Cleaning and preparation of paint surfaces
- Handling sharp-edged materials
- Laboratory, research and development work
- Installation/maintenance of mechanical components
- Metalworking with rust protection products
- Tool and component cleaning
- Rinsing laboratory glassware
- Wiping clean/spot cleaning
Size | 11 |
Material | Nitrile |
Standards | EN 388:2016, EN 407, EN 374-1, EN 374-5 |
Category | III |
Length | 350 mm |
Material thickness | 1 mm |
Colour | Green |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
90-degree BRK connector with bulkhead fitting
OrgaAer deflector clamp
Countersunk head screw with recessed head, H DIN 965, A4 stainless steel, plain
Pan head tapping screws with recessed head H ISO 7049, black zinc-nickel plated steel, pan head PH drive, type C
Flat-head tapping screw, shape F with hexalobular drive ISO 14585, blue passivated zinc plated steel, type F (no tip)
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Disposable standard Big Bag With skirting and fastener bands
Work stool, workshop accessories
Lock washer S spring steel with mechanically applied zinc coating (≤ dia. 3.5 zinc-plated, blue passivated)
Safety boots, S2 Uvex 2 xenova® 9566
