Protective jaw Polyurethane
Polyurethane protective jaw
PROTJAW-PUR-150MM
Register now and access more than 125,000 products
- Versatile because it can be easily deformed and reformed
- Ideal for thin-walled tubes and shaped parts, wooden and plastic parts due to the synthetic rubber
- Secure hold even with low clamping pressures thanks to the plasticity of the surface
- Clamped parts are not magnetised due to the special magnetic holder
- Also for round workpieces thanks to the integrated prisms
- The protective jaws are delivered in the set and are therefore ready for use immediately
Datasheets(X)
Width of clamping jaw | 150 mm |
Material | Polyurethane |
Last viewed
ASME B18.16.6 steel GRB zinc plated waxed
Twist drill bit HSS DIN 338 type RN 130°
Hexagonal bolt with shank DIN 601/ISO 4016, steel 4.8, zinc-plated, blue passivated (A2K), with nut
Countersunk tapping screw, shape C with Z recessed head DIN 7982, A2 stainless steel, PZ drive
Straight male fitting ISO 8434-1, stainless steel 1.4571, BSPP male thread with seal
Crimping tool 360° insertion For insulated and uninsulated wire end ferrules
Protective glove, chemicals
Flat washer without chamfer ISO 7089 steel 200 HV, zinc-plated, blue passivated (A2K)
Safety boots, S3
GEFU® thread-rolling screw With Taptite 2000® thread, flat head and hexalobular drive