Push-in quick-fit plug

Name: Push-in quick-fit plug
Brand: Würth
SKU: 088504 62

Straight screw-in connector
SCRINCON-SR-D6-M12X1,5

Art.-no. 088504 62

EAN 4011231817080

All versions

Specification

Straight screw-in plug connector for commercial vehicles

Quick and easy pipe/hose installation and removal

Reduced risk of leaks

as there are fewer components

Corrosion-resistant brass design

Cost savings

thanks to reduction in installation and repair times

Complies with the international DIN, DOT and SAE regulations

Operating medium: Compressed air

Maximum operating pressure: In accordance with DIN 74324

Operating temperature: -40°C* to +100°C

(* at temperatures below +2°C please observe the air quality)

Hoses: In accordance with DIN 74324

Material:

Connector body: Brass

Pipe reinforcing sleeve: Brass, nickel-plated

Multi-pronged tensioning clamp ring: Brass, nickel-plated

O-ring: Buna N (low nitrile)

Notice

Above a certain length, pipes "vibrate", irrespective of whether they are made of steel, copper or plastic. Therefore, all brake line piping (5-16 mm diameter) should be secured on the body or on the frame using pipe clamps, rubberised if possible, wherein the distance should be 1 m and must not exceed 1.20 m.

Screw connections meet the requirements of DIN 74324

Screw connections meet the requirements of the Department Of Transport Federal Motor Vehicle Safety Standard (DOT FMVSS 106) and the Society for Automotive Engineers (SAE J1131)

Screw connections are TÜV tested and approved for use in pneumatic brake systems

on commercial vehicles

Application

Application area

For polyamide pipes Ø 6 to 16 mm, for connecting components in the pneumatic brake system to commercial vehicles and auxiliary commercial vehicle systems.