Push-in rivet, type 1
Push-in rivet without head
HAMRIV-TOYOTA-BLACK
Register now and access more than 125,000 products
Extremely straightforward fitting and removal
- For fitting: Press down on the pin
- For removal: Press the pin again
High retention force and a secure fit in the component
Datasheets(X)
Sheet metal attachments
 | |
Min./max. drill hole diameter | 6.60-6.80 mm |
Min./max. attachment thickness | 6.00-8.00 mm |
Length | 10.10 mm |
Length below head (A) | 10.10 mm |
Head diameter (B) | 5.30 mm |
Head height (C) | 1.50 mm |
Colour | Black |
Material | Polyoxymethylene |
Suitable for vehicle manufacturer | Mitsubishi |
Corresponds to original spare part number | MB476821, 9046707041 |
installation location | Interior |
Last viewed
Work trousers
Wire nail DIN 1151, steel, plain
Hexagon Socket Head Cap Screw with low Head DIN 7984, steel 8.8, plain
Locking system, DPS
Rechargeable battery For Würth power tools Li-ion 12 volt
Pin wrench
Work jacket
Hexagon Socket Head Cap Screw with low Head DIN 7984, steel 8.8, plain
Identification rings, M-65 standard
1/2 inch impact socket wrench set inch hexagon Short, 11 pieces