Push-through perforated sleeve SH for BASIC WIT-PM 200 and ALLROUNDER WIT-VM 250 PRO injection systems
Push-through perforated sleeve SH
ANC-SH-PLA-TRANP-16X330MM
Register now and access more than 125,000 products
- Anchor rods W-VI-A are held centrally in the perforated sleeve during installation
- The perforated sleeve collar can be shortened to the appropriate fixture thickness (wooden beam + plaster thickness)
- Individual fixing point in masonry: BASIC WIT-PM 200, anchor rod W-VI-A, conventional threaded rod with acceptance certificate
- Individual fixing point in masonry: ALLROUNDER WIT-VM 250, anchor rod W-VI-A, conventional threaded rod with acceptance certificate
Datasheets(X)
CAD data (available after login)
For anchoring in solid and perforated brick masonry
Type description | SH 16 x 130/200 |
Diameter | 16 mm |
Length | 330 mm |
Material | Plastic |
Nominal drill-bit diameter (d 0) | 16 mm |
Drill hole depth (h 0) - condition | 135 mm (+t fix) |
Effective anchoring depth (h ef) | 130 mm |
Suitable for anchor rod | M8 |
Suitable for female thread sleeve | 0 - not applicable |
Required injection mortar | WIT-PM 200, WIT-VM 250 |
Approval | ETA-13/0037, ETA-20/0854 |
Last viewed
Chuck for hand-held rivet pliers
Washer and nut WN-810 steel plain
FILL & CLEAN static mixer
XXL belt bag Martor 9924
Vehicle dry sandpaper disc Arizona® Perfect
Vehicle dry abrasive paper disc RED PERFECT®
Front base connector For frame systems
Hexagon socket set screw with ring cutter ISO 4029, A2 stainless steel, 21H, plain
Plug-in car suction nozzle
Hand tap, third tap HSS DIN 352