Quick-action chuck Metal sleeve
Keyless chuck, metal sleeve
DRLCHUK-KEYLESS-1/2IN-(1-13)
Register now and access more than 125,000 products
The mount is not marked on all drill chucks.
In the interests of safety, therefore, you should measure the drill chuck spindle:
- 1/2” = 12.7 mm
- 3/8” = 9.5 mm
- 5/8” - 16 = 15.9 mm
- B 16 = 15.7 mm
Datasheets(X)
Drill chuck type | Quick action chuck, metal sleeve |
Drill chuck holder | 1/2 inch x 20 UNF |
Min./max. drill chuck span width | 1-13 mm |
Suitable for left-hand rotation | No |
Suitable for impact work | No |
Product weight (per item) | 425.000 g |
Last viewed
Blind rivet, flat head
Jacket Planam Highline
Hexagon head bolt with shank and fine thread ISO 8765, steel 12.9, plain
Impact insert
Shim ring DIN 988, steel, plain
Shim ring DIN 988, steel, plain
Hexagon socket set screw with pin ISO 4028, steel, 45H, plain
Work coat
Double cylinder S5 locking system
Twist drill bit HSCo DIN 340 type RN OXIDE