RED PERFECT® 3D mini non-woven disc
Mini non-woven disc RED PERFECT 3D
SNDDISC-NYLFLC-(VERY FINE)-D50MM
RED PERFECT
Register now and access more than 125,000 products
- Perfect final sanding suitable for high surface requirements with significantly lower roughness depth, without producing a high-gloss finish
- Very long service life and even distribution of the abrasive grain ensure a consistent grinding finish on the workpiece
- Extra-reinforced nylon non-woven abrasive with three-dimensional non-woven structure for a more compact and abrasive design, resulting in a considerably higher edge strength
- The flexible and elasticated structure of the non-woven fabric ensures optimal adaptation to the workpiece
- No change to the geometry of the workpiece
- For use on pneumatic die grinders with angled, flexible shafts
- 75 mm discs can also be used on 115 mm pneumatic or electric angle grinders in conjunction with an M14 holder
- At high rotation speeds, a coarse grain acts like a finer grain, and at low rotation speeds, a fine grain acts like a coarser grain
- Use tools with a low contact pressure; high contact pressure leads to premature wear
- If chip removal is insufficient, do not increase the contact pressure, but instead use a coarser grit
- Enhanced process reliability: Whether you are working with an electric sanding file, tube belt sander, stationary contact grinding machine or angle grinder, a consistent surface quality is ensured
Datasheets(X)
- For finishing, matting, satin finishing and blending with very low roughness depth
- No sanding through when machining body parts
- For removing discolouration, paint layers, surface rust, dirt and oxide layers, restoring slightly damaged surfaces and fine mattings and for deburring
- For removing sanding grooves, scratches, coatings and old paint
- For cleaning surfaces
- Materials to be processed: steel, high-grade steel, aluminium, brass, copper, wood and plastics
Diameter (Ø) | 50 mm |
Colour | Grey |
Design | Compatible with 3M Roloc system |
Grid size | 400 / very fine |
Max. rotation speed | 25000 1/min |
Min. recommended rotation speed | 10000 1/min |
Max. recommended rotation speed | 20000 1/min |
Last viewed
Hexagonal bolt with thread up to the head
Hole puncher with splitting punch Metric ISO sizes in accordance with EN 50262
Hexagonal nut with flange and clamping piece (all-metal) according to MBN standard
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Drive screw For Fixograss 9000 drilling jig, SBL-3 and VBL-2
Hexagonal bolt with shank
Cable ties with metal latch closure – industrial quality
Hexagon screw, type S/S — push-through installation DIN 933 steel 8.8, zinc-plated blue
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
Mounting frame set 4 for workbenches