RED PERFECT® 3D non-woven lamella flap disc for direct use on angle grinders
Non-woven lamella flap disc RED PERFECT 3D
SNDDISC-NYLFLC-VERYFINE-4,5"X7/8"
RED PERFECT
Register now and access more than 125,000 products
- Free of iron, chlorine and sulphur (≤ 0.1 %)
- Extra-reinforced non-woven nylon abrasive with needled fabric backing
- Rugged fibreglass backing pad
- Long service life due to segment arrangement
- Compact design and intensive grinding
- No change in shape during grinding
- No clogging
- Cooler grinding (low working temperature)
- No additional backing pad required
- Use a speed-adjustable angle grinder
- Wear safety goggles and gloves
Datasheets(X)
- Used for grinding surfaces and edges, dressing and smoothing, deburring and for weld seam machining
- For cleaning and polishing unalloyed and high-alloy steels, aluminium and non-ferrous metals
- Removing oxide films and discolouration after welding and after plasma cutting of high-grade steel sheets
- Removing surface defects (minor scratches)
- For preparing surfaces to be painted, for removing paint and rust
Diameter (Ø) | 115 mm |
Drill hole | 22.23 mm |
Colour | Grey |
Design | Very fine |
Max. rotation speed | 13300 1/min |
Min. recommended rotation speed | 5000 1/min |
Max. recommended rotation speed | 5800 1/min |
Last viewed
GRIP marking system
Crossover bend, with solder connection on both sides EN1254, copper, 5085
Work vest
Pipe and fastening clamp Multifix
AS S3 Winter safety boots
Longlife cutting disc For steel
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
Washer For screws with a heavy clamping sleeve DIN 7349, A4 stainless steel
Hexagonal bolt with thread up to the head DIN 933, steel 10.9, zinc-plated, blue passivated (A2K)
Aluminium clamping rods