Welcome to Würth Aerospace Solutions For trade customers only

Radiator anti-freeze Basic

Radiator anti-freeze concentrate Basic
CLANTIFREZ-BASIC-W20-200LTR

Art.-no. 5861500205

EAN 4053479306353

Individual price display after login
Radiator anti-freeze Basic

Art.-no. 5861500205

Individual price display after login
Quantity
PU
x 1 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

Radiator anti-freeze concentrate for water-cooled vehicle engines
  • Good environmental compatibility as free from nitrite, amine and phosphate

  • Reliable anti-freeze and corrosion protection in the radiator guarantees faultless engine operation

  • Meets the requirements of British Standard BS 6580:1992

  • Good miscibility

  • Favourable evaporation properties

  • Stable in hard water

  • Corrosion protection even for non-ferrous base metals

  • Compatible with elastomers

  • For petrol and diesel engines
Notice

At dilutions of below 33 vol.% Radiator Protection Basic W20, which corresponds to a freezing point of above -20°C, adequate anti-corrosion protection is no longer guaranteed. Do not mix with other radiator coolants.

Mixing ratio forAnti-freezeWaterProtection down to
Basic W 20 radiator anti-freeze1 part1 part-37 °C
1 part2 parts-18 °C
1 part1.5 parts-25 °C

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area

Cooler corrosion protection and anti-freeze concentrate for all cooling systems and engines, also for aluminium engines.

Instructions

Drain and flush out the radiator. Then fill the radiator with the anti-freeze and water in the desired ratio (according to mixing table). Be sure to observe the vehicle owner’s manual!

Type description

W20 Basic radiator protection

Boiling point

170 °C

Product weight (per item)

243.000 kg

Density/conditions

1.131 g/cm³ / at 20°C

Weight of content

225 kg

Colour

Blue

Chemical basis

Ethylene glycol

Contents

200 l

Shelf life from production/conditions

48 Month / keep containers tightly sealed in a dry, cool and well-ventilated place. Protect from frost, heat and sunlight. Do not use compressed gas to empty the containers. Store in original container, 15°C to 30°C

pH value

8.4

Suitable glove:
 
Product
Description
Household glove
Household glove
Description:
Permeation level: 2
Liquid-proof, premium-quality cleaning glove made from natural latex
Vinyl chemical and moisture protective glove
Vinyl chemical and moisture protective glove
Description:
Permeation level: 6
Fully dipped protective glove with vinyl coating on cotton jersey lining
Chemical protective glove, Butyl
Chemical protective glove, Butyl
Description:
Permeation level: 6
Gas-tight and resistant to exhaust gases produced by combustion processes
Chemical protective glove PVC w. backing fabric
Chemical protective glove PVC w. backing fabric
Description:
Permeation level: 6
Very robust, submersible PVC glove with cotton support fabric
Chemical protective glove made from chloroprene and latex
Chemical protective glove made from chloroprene and latex
Description:
Permeation level: 3
Cotton flocking on the inside
Nitrile chemical protective glove with cotton velour finish inside
Nitrile chemical protective glove with cotton velour finish inside
Description:
Permeation level: 6
Nitrile chemical protective glove long, heavy-duty design
Nitrile chemical protective glove long, heavy-duty design
Description:
Permeation level: 6
Chemical protective glove chloroprene
Chemical protective glove chloroprene
Description:
Permeation level: 6
Heavy-duty design
Chemical protective glove nitrile with backing fabric
Chemical protective glove nitrile with backing fabric
Description:
Permeation level: 6
Robust, liquid-tight protective glove with polyamide support fabric that combines optimum chemical protection, secure grip and comfort
Disposable nitrile glove
Disposable nitrile glove
Description:
Permeation level: 3
Liquid-proof, food-safe disposable glove
Disposable nitrile grip glove
Disposable nitrile grip glove
Description:
Permeation level: 3
Unique, diamond texture for optimal grip
Disposable glove Nitrile Grip Comfort
Disposable glove Nitrile Grip Comfort
Description:
Permeation level: 4
Very robust disposable gloves with excellent grip thanks to special nubs and maximum wearing comfort thanks to cotton flocking inside
Disposable gloves, nitrile, extra strong, type A
Disposable gloves, nitrile, extra strong, type A
Description:
Permeation level: 4
Durable and robust disposable gloves with excellent chemical protection
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information