Radiator installation box, masonry
Radiator installation box freely sel. masonry
INSTLBOX-RAD-MN-DN16
Register now and access more than 125,000 products
For millimetre-precise and firm installation so as to ensure optimal sound insulation
Simple installation
Quick mounting without screw connection
Huge time savings
- Pipe feedthroughs are completely pre-assembled without tension and ready for connection
- The enlarged and elegant wall panels increase the accuracy of the wall connection
Tested with maximum dimensional accuracy
- Drywall can be sealed immediately
Makes working practices easier
- Prevents unevenness during tiling work
- No corrosion
- Protection against condensation water
Stable substrate
The plaster and tile base boards guarantee a permanently stable substrate
Optimum insulation
The fittings are protected thanks to the millimetre-precise outlet guides
Please state the desired pipe system when ordering.
The following information is required:
Pipe manufacturer: e.g. Viega
Pipe type: e.g. Raxofix
Your order cannot be processed without this information.
Custom production. Extended delivery times up to max. 7 working days.
These products cannot be exchanged or returned. Each order is manufactured individually to the customer's specifications
Datasheets(X)
For the connection of valve radiators in masonry from the wall side
1. The corresponding recesses must be left in the masonry using the installation box supplied or the installation recommendation.
2. The box must then be fixed in place using the assembly jig and foam-filled with 1C assembly foam.
3. Leave to harden according to the instructions supplied with the foam and remove the assembly jig.
 | |
Material of box | Closed-cell polyurethane foam |
Box height | 120 mm |
Box width | 100 mm |
Box depth | 50 mm |
DN tube connection | DN.. 16.. |
Distance centre of pipe to centre of pipe | 50 mm |
Pipe length | 420 mm |
Product weight (per item) | 187.000 g |
Material of pipe | Polyethylene polymerised |
Colour | Red |
Manufacturer of pipe system | Freely selectable |
Last viewed
Protective glove, fabric
FKM 80 Shore O-ring ISO 3601-1
PVC single core H05/H07V-K, fine wire
Hexagonal bolt with thread up to the head ISO 4017, steel 10.9, plain
Work trousers
3KS Plus profile double cylinder For keyed alike profile cylinders in original equipment
EPS profile thumbturn cylinder
Installation unit for data technology, front latching For BR 80 wall duct
Handle plate on outer plate
Shim ring DIN 988, steel, plain