Raised contersunk head tapping screw, C shape with H recessed head DIN 7983, steel, zinc-plated black (A2S), with H cross recess.
DIN 7983 steel zinc plated black H shape C w. tip
SCR-RSDCS-DIN7983-C-H2-(A2S)-4,2X9,5
Register now and access more than 125,000 products
Tapping screws belong to the thread-moulding screw family. When screwed into a pre-prepared core hole, these screws shape their own counter-thread.
Guideline values for selecting the correct core hole diameter are contained in DIN 7975.
Shape C = thread with tip
Shape F = Thread without tip
Shape R = Thread with rounded tip
Datasheets(X)
CAD data (available after login)
 | |
Standards | DIN 7983 |
Material | Steel |
Surface | Zinc plated black |
Form | C |
Head type | Raised countersunk head |
Drive type | H |
Internal drive | H2 |
Nominal diameter (d1) | 4.2 mm |
Head diameter (dk) | 8.1 mm |
Length (l1) | 9.5 mm |
Head height (k1) | 2.5 mm |
Head details | 0 - not applicable |
Thread type | Self-tapping screw thread |
Thread design | Full thread |
Thread form | 0 - not applicable |
RoHS-compliant | No |
Declaration of performance (EU-CPR) | No |
Last viewed
Binding wire loop Double-twisted
Countersunk tapping screw, shape C with Z recessed head DIN 7982, steel, zinc-plated, blue passivated (A2K)
Cylinder tapping screw, C shape with hexagon socket
Heavy-duty floor marking Point roll
Square wedge-shaped washer DIN 434, A2 stainless steel, plain, wedge-shaped, for U section
Threaded fitting
Crimp cable lug, push connector PVC-insulated
Countersunk head screw with hexagon socket, full thread
Stretch Evolution softshell jacket
Rotor replacem. f. pneu. die grinder 116100-1 RUKO