Raised countersunk head screw with recessed head, H ISO 7047, steel 8.8, zinc flake, silver (ZFSHL)
ISO 7047 steel 8.8, zinc-flake
SCR-RSDCS-ISO7047-8.8-H3-(ZFSHL)-M6X50
Register now and access more than 125,000 products
Zinc-flake coatings are chrome-(VI)-free corrosion protection coatings for commercial vehicle assembly, construction machinery, agricultural vehicles and equipment, and all other areas that have corrosion protection requirements at vehicle construction level.
Corrosion resistance for ZFSHL is:
- Diameter ≥ M6 - 480h*
- Diameter ≥ M10 - 720h*
The designation ZFSHL refers to the following corrosion coating:
- Zinc-flake coating, with top coat, silver colour, with friction value adjusted lubrication.
- Adjusted friction coefficient range from 0.09μ – 0.14μ due to top coat with integrated lubricating particles
ISO 7047 replaces DIN 966 | There is some limited similarity | Some head heights and head diameters have been changed | Thread lengths changed | Strength class 5.8 and 8.8 omitted | Recessed head penetration depths changed.
Datasheets(X)
 | |
Thread type x nominal diameter (d1) | M6 |
Length (l1) | 50 mm |
Head diameter (dk) | 11.3 mm |
Head height (k1) | 3.3 mm |
Standards | ISO 7047 |
Material | Steel |
Property class | 8.8 |
Surface | Flake zinc silver |
RoHS-compliant | Yes |
Head type | Raised countersunk head |
Head details | 0 - not applicable |
Drive type | Crosshead |
Internal drive | H3 |
Thread type | Metric thread |
Pitch | 1 mm |
Thread form | Standard metric thread |
Thread design | 0 - not applicable |
Design | 0 - not applicable |
Product class | A |
Area of application | 0 - not applicable |
Regulated area | 0 - not applicable |
Construction product | 0 - not applicable |
EC declaration of conformity (CE) | 0 - not applicable |
Last viewed
Hexagon socket set screw with truncated cone ISO 4026 steel 45H, plain
GEFU® thread-rolling screw With Taptite 2000® thread, countersunk head with hexalobular drive
Twist drill bit assortment HSCo DIN 338 type RN Oxide 19 pieces
Table frame TMQ70/3 NT
Hexagonal bolt
Hexagon socket set screw with pin ISO 4028, A2 stainless steel, 21H, plain
Hexagonal bolt with shank, SB FITTINGS, DIN EN 15048-1 DIN 7990, steel 4.6, hot-dip galvanised (hdg)
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
Work trousers