Raised countersunk head screw with recessed head, H ISO 7047, steel 8.8, zinc flake, silver (ZFSHL)
ISO 7047 steel 8.8, zinc-flake
SCR-RSDCS-ISO7047-8.8-H4-(ZFSHL)-M8X35
Register now and access more than 125,000 products
Zinc-flake coatings are chrome-(VI)-free corrosion protection coatings for commercial vehicle assembly, construction machinery, agricultural vehicles and equipment, and all other areas that have corrosion protection requirements at vehicle construction level.
Corrosion resistance for ZFSHL is:
- Diameter ≥ M6 - 480h*
- Diameter ≥ M10 - 720h*
The designation ZFSHL refers to the following corrosion coating:
- Zinc-flake coating, with top coat, silver colour, with friction value adjusted lubrication.
- Adjusted friction coefficient range from 0.09μ – 0.14μ due to top coat with integrated lubricating particles
ISO 7047 replaces DIN 966 | There is some limited similarity | Some head heights and head diameters have been changed | Thread lengths changed | Strength class 5.8 and 8.8 omitted | Recessed head penetration depths changed.
Datasheets(X)
 | |
Thread type x nominal diameter (d1) | M8 |
Length (l1) | 35 mm |
Head diameter (dk) | 15.8 mm |
Head height (k1) | 4.65 mm |
Standards | ISO 7047 |
Material | Steel |
Property class | 8.8 |
Surface | Flake zinc silver |
RoHS-compliant | Yes |
Head type | Raised countersunk head |
Drive type | Crosshead |
Internal drive | H3 |
Thread type | Metric thread |
Pitch | 1.25 mm |
Thread form | Standard metric thread |
Product class | A |
Last viewed
Hexagonal bolt with thread up to the head ISO 4017, steel 10.9, plain
Hammer drill bit Plus Duo-S Vario
Door handle A 806 on oval escutcheon
Heat-shrink crimp connector, HIGH-END ring connector
ASSY®plus VG 4 ETX construction screw Steel zinc plated full thread external TX
Paint spray, high gloss
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain
Threaded fitting
Work trousers
Plastic screw combination EUROFAST® TWPB-8040