Raised countersunk tapping screw, C shape with H recessed head
DIN 7983 steel zinc plated yellow H shape C w. tip
SCR-RSDCS-DIN7983-C-H2-(A2C)-3,5X19
Register now and access more than 125,000 products
- Tapping screws belong to the thread-moulding screw family. These screws form their own counter thread in a prefabricated core hole when screwed in
- Guidelines for selecting the correct core hole diameter can be found in DIN 7975
Datasheets(X)
 | |
Standards | DIN 7983 |
Material | Steel |
Surface | Zinc plated yellow |
Form | C |
Head type | Raised countersunk head |
Drive type | H |
Internal drive | H2 |
Nominal diameter (d1) | 3.5 mm |
Head diameter (dk) | 6.8 mm |
Length (l1) | 19 mm |
Head height (k1) | 2.1 mm |
Thread type | Self-tapping screw thread |
RoHS-compliant | No |
Declaration of performance (EU-CPR) | No |
Last viewed
Nail HN 101 For use in steel and concrete substrates
90° HSCo WN type RN TiAlN NC spotting drill bit
Reserve taper grooved dowel pin ISO 8741 steel plain
GEFU® thread-rolling screw With Taptite 2000® thread, hexagon head with collar and hexalobular drive (TXplus)
Identification rings, PVC
Low-cut safety shoe S3
Screw-mounted shield clamp
Housing
Stud with head, shape B
Hexagonal bolt with flange