Raised countersunk tapping screw, C shape with H recessed head
ISO 7051 steel zinc plated H shape C
SCR-RSDCS-ISO7051-C-H2-(A2K)-3,5X25
Register now and access more than 125,000 products
- Tapping screws belong to the thread-moulding screw family. These screws form their own counter thread in a prefabricated core hole when screwed in
- Guidelines for selecting the correct core hole diameter can be found in DIN 7975
Datasheets(X)
 | |
Standards | ISO 7051 |
Material | Steel |
Surface | Zinc plated |
Head type | Raised countersunk head |
Drive type | Crosshead |
Internal drive | H2 |
Nominal diameter (d1) | 3.5 mm |
Head diameter (dk) | 8.2 mm |
Length (l1) | 25 mm |
Head height (k1) | 2.35 mm |
Thread type | Self-tapping screw thread |
Thread design | Full thread |
Pitch | 1.3 mm |
Product class | A |
RoHS-compliant | Yes |
Construction product | 0 - not applicable |
Declaration of performance (EU-CPR) | No |
Last viewed
Short-sleeved business shirt
Fitting, flat sealing, with female thread EN10242 U1, hot-dip galvanised malleable iron
Wire cable barrel terminal with nut, left-hand thread
PRIPRESS® transition with male thread
Wing repair washer In accordance with DIN 522, A2 stainless steel, plain
Blow-out gun With standard short nozzle
AL 900 door handle on inner plate With CK punch
Hexagon nut with clamping piece (non-metal insert) fine thread ISO 10512, steel, strength class 10, zinc flake, silver (ZFSHL)
Split pin ISO 1234 A4-70 stainless steel, plain
Stud with threaded end ≈ 1.25 d DIN 939, A2 stainless steel, plain