Raised countersunk tapping screw, C shape with H recessed head
ISO 7051 steel zinc plated H shape C
SCR-RSDCS-ISO7051-C-H2-(A2K)-4,2X13
Register now and access more than 125,000 products
- Tapping screws belong to the thread-moulding screw family. These screws form their own counter thread in a prefabricated core hole when screwed in
- Guidelines for selecting the correct core hole diameter can be found in DIN 7975
Datasheets(X)
 | |
Standards | ISO 7051 |
Material | Steel |
Surface | Zinc plated |
Head type | Raised countersunk head |
Drive type | Crosshead |
Internal drive | H2 |
Nominal diameter (d1) | 4.2 mm |
Head diameter (dk) | 9.4 mm |
Length (l1) | 13 mm |
Head height (k1) | 2.6 mm |
Thread type | Self-tapping screw thread |
Thread design | Full thread |
Pitch | 1.3 mm |
Product class | A |
RoHS-compliant | Yes |
Construction product | 0 - not applicable |
Declaration of performance (EU-CPR) | No |
Last viewed
Taper-grooved dowel pin ISO 8745 steel plain
Cylindrical pin, hardened DIN 6325, steel, plain
Set of railings
Crepe masking tape
T-piece with female thread at the outlet EN1254, gunmetal, 4130G
Hat, hood, cap
Hexagonal bolt with shank
Work dungarees
C 8.0 TX bit (5/16 inch) C 8.0 (5/16 inch)
Jacket Planam Highline