Raised countersunk tapping screw, C shape with H recessed head
ISO 7051 steel zinc plated H shape C
SCR-RSDCS-ISO7051-C-H2-(A2K)-4,2X32
Register now and access more than 125,000 products
- Tapping screws belong to the thread-moulding screw family. These screws form their own counter thread in a prefabricated core hole when screwed in
- Guidelines for selecting the correct core hole diameter can be found in DIN 7975
Datasheets(X)
 | |
Standards | ISO 7051 |
Material | Steel |
Surface | Zinc plated |
Head type | Raised countersunk head |
Drive type | Crosshead |
Internal drive | H2 |
Nominal diameter (d1) | 4.2 mm |
Head diameter (dk) | 9.4 mm |
Length (l1) | 32 mm |
Head height (k1) | 2.6 mm |
Thread type | Self-tapping screw thread |
Thread design | Full thread |
Pitch | 1.3 mm |
Product class | A |
RoHS-compliant | Yes |
Construction product | 0 - not applicable |
Declaration of performance (EU-CPR) | No |
Last viewed
Foam soap For SKIN dispenser
Work trousers
Hexagonal bolt with thread up to the head
Hydro S3 safety boots
Partial exoskeleton Ottobock CX Soft Back back strap
Tool panel For tool cases with castors
4KS profile thumbturn cylinder
Lock washer for shaft, stored
Low-cut safety shoes, S1
Low-cut safety shoes, S2