Raised countersunk tapping screw, F shape with H recessed head DIN 7983, steel, zinc-plated, blue passivated (A2K), shape F, H cross recess
DIN 7983 steel zinc plated H shape F
SCR-RSDCS-DIN7983-F-H2-(A2K)-3,5X13
Register now and access more than 125,000 products
- Tapping screws belong to the thread-moulding screw family. These screws form their own counter thread in a prefabricated core hole when screwed in
- Guidelines for selecting the correct core hole diameter can be found in DIN 7975
- Shape C = with tip
- Shape F = no tip
- Shape R = rounded tip
Datasheets(X)
 | |
Standards | DIN 7983 |
Material | Steel |
Surface | Zinc plated |
Form | F |
Head type | Raised countersunk head |
Drive type | H |
Internal drive | H2 |
Nominal diameter (d1) | 3.5 mm |
Head diameter (dk) | 6.8 mm |
Length (l1) | 13 mm |
Head height (k1) | 2.1 mm |
Head details | 0 - not applicable |
Thread type | Self-tapping screw thread |
Thread design | Full thread |
Thread form | 0 - not applicable |
RoHS-compliant | Yes |
Declaration of performance (EU-CPR) | No |
| Thread size | St 2.2 | St 2.9 | St 3.5 | St 3.9 | St 4.2 | St 4.8 | St 5.5 | St 6.3 | St 8 | St 9.5 |
| Min. sheet thickness (mm) | 0,8 | 1,1 | 1,3 | 1,3 | 1,4 | 1,6 | 1,8 | 1,8 | 2,1 | 2,1 |
| Max. sheet thickness (mm) | 1,8 | 2,2 | 2,8 | 3 | 3,5 | 4 | 4,5 | 5 | 6,5 | 7,5 |
| Pre-drilling diameter (mm) | 1,2 | 2,1 | 2,6 | 2,8 | 3,0 | 3,5 | 4,1 | 4,7 | 6,1 | 7,7 |
Last viewed
90° angled cutting ring fitting ISO 8434-1, zinc-nickel-plated steel
Work trousers Kübler Image Dress New Design 2346 3411
Hexagon head bolt with thread up to head ISO 4017, A2-50 stainless steel, plain
FKM 80 Shore O-ring ISO 3601-1
WSH III 5-13 automatic welding helmet For professional welders
Hexagonal bolt with shank
Hexagon Socket Head Cap Screw with centre, with low head
Grip plug GPN 310 Polyethylene (PE-LD), red
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
Screw fitting