Raised countersunk tapping screw, F shape with H recessed head DIN 7983, steel, zinc-plated, blue passivated (A2K), shape F, H cross recess
DIN 7983 steel zinc plated H shape F
SCR-RSDCS-DIN7983-F-H2-(A2K)-3,5X16
Register now and access more than 125,000 products
- Tapping screws belong to the thread-moulding screw family. These screws form their own counter thread in a prefabricated core hole when screwed in
- Guidelines for selecting the correct core hole diameter can be found in DIN 7975
- Shape C = with tip
- Shape F = no tip
- Shape R = rounded tip
Datasheets(X)
 | |
Standards | DIN 7983 |
Material | Steel |
Surface | Zinc plated |
Form | F |
Head type | Raised countersunk head |
Drive type | H |
Internal drive | H2 |
Nominal diameter (d1) | 3.5 mm |
Head diameter (dk) | 6.8 mm |
Length (l1) | 16 mm |
Head height (k1) | 2.1 mm |
Thread type | Self-tapping screw thread |
Thread design | Full thread |
RoHS-compliant | Yes |
Declaration of performance (EU-CPR) | No |
Last viewed
Locking system, DPS
OrgaAer Speed Office container set
Countersunk tapping screw, shape C with Z recessed head DIN 7982, steel, zinc-plated, blue passivated (A2K)
Hexagon shoulder screw with long threaded pin DIN 609, steel 8.8, zinc-plated, blue passivated (A2K)
1" socket wrench insert metric, bi-hex, short
Charger for cordless concrete vibrator
Soft-face hammer Halder Supercraft soft-face hammer Series 3377
Safety boots S3
HSS annular cutter
Installation box water meter dry construction