Random orbital sander, pneumatic Mirka PROS CV
Pneumatic random orbital sander PROS CV Mirka
ORBITALSNDR-MIRKA-PROS-680CV-8995680111
Register now and access more than 125,000 products
Among the innovative functions is the disc brake, which has been specially developed for this tool and offers a number of notable performance advantages. Unlike conventional pneumatic random orbital sanders, the rotation is slowed down as soon as the power tool is removed from the surface. This mechanism avoids unintended deep scratches that can occur when an unbraked random orbital sander is placed on the surface. The external channels on the newly developed abrasive disc feed fresh air into the centre of the power tool. This provides increased airflow, resulting in excellent suction.
Datasheets(X)
Diameter of sanding plate | 150 mm |
Max. idle speed | 12000 rpm |
Power output | 270 W |
Operating pressure | 6.2 bar |
Air consumption | 485 l/min |
Weight of machine | 950 g |
Min. hose inner diameter | 10 mm |
Last viewed
2C multi-purpose anchor SHARK® TWIST One anchor. Eight knots.
Hexagonal bolt with flange
Locking system, DPS
HSCo dovetail milling cutter DIN 1833 D
K insulation pipe clamp With permanently integrated damping insert
Countersunk screw with hexalobular head
Concealed slide full-extension slide Dynapro With integrated soft-close system
VARIFIX® hammer head fastener standard fix Pre-assembled with nut and washer, zinc-plated
Hexagon nut, inch
Sanding system dust-free sanding disc Useit® Superpad F