Rapid SML connector
SML connector, Rapid
CON-SML-RAPID-DN150
Register now and access more than 125,000 products
Fast, safe connection with only one screw-in nut
Simple mounting of the connector thanks to pre-mounted, slip-proof EPDM sealing insert
Closing of connector with simple Allen screw size 6 / size 8
No torque wrench or special tools required
Pre-assembly of pipes and moulded parts requires no effort due to powerful clamping effect
No tightening torque required, as block tightening is used (both clamping jaws must strike each other)
For building drainage
 | |
DN nominal width (∅D) | DN 150 |
Width across flats | 6 mm |
Material of sealing ring | Ethylene propylene diene terpolymer rubber EPDM |
Material of sheet-metal ring covering | Chrome steel |
Material of fastener | Steel |
Operating pressure | 0.5 bar |
Internal drive | HS6 |
Min. temperature resistance | -10 °C |
Max. temperature resistance | 95 °C |
Height (H) | 187 mm |
Width (BM) | 55 mm |
Thread type | Metric thread |
Resistance against | Aging, Ozone, Weather |
Outer diameter | 172 mm |
Nominal diameter | 8 mm |
Datasheets (1)
CAD data (available after login)
Certificates/ Documents (0)
Last viewed
ASME B18.8.2 steel mech. applied zinc coating
Seal set for pre-collector Sundström R03-2105
Threaded rod, left-hand thread DIN 976-1 (shape A), zinc-plated steel 8.8, blue passivated (A2K)
Backplate for tension anchors, two pieces
Ring bolt H.Q.E. with variable screw length
Slotted cheese head
Ballpoint pen Capri Unprinted
Article sticker
T-connector For commercial vehicles
Manual taper tap Ruko hand tap HSS DIN 2181 fine thread taper tap
