Rapid SML connector
SML connector, Rapid
CON-SML-RAPID-DN80
Register now and access more than 125,000 products
Fast, safe connection with only one screw-in nut
Simple mounting of the connector thanks to pre-mounted, slip-proof EPDM sealing insert
Closing of connector with simple Allen screw size 6 / size 8
No torque wrench or special tools required
Pre-assembly of pipes and moulded parts requires no effort due to powerful clamping effect
No tightening torque required, as block tightening is used (both clamping jaws must strike each other)
Datasheets(X)
CAD data (available after login)
For building drainage
 | |
DN nominal width (∅D) | DN 80 |
Width across flats | 6 mm |
Material of sealing ring | Ethylene propylene diene terpolymer rubber EPDM |
Material of sheet-metal ring covering | Chrome steel |
Material of fastener | Steel |
Operating pressure | 0.5 bar |
Internal drive | HS6 |
Min. temperature resistance | -10 °C |
Max. temperature resistance | 95 °C |
Height (H) | 105 mm |
Width (BM) | 40 mm |
Thread type | Metric thread |
Resistance against | Aging, Ozone, Weather |
Outer diameter | 95 mm |
Nominal diameter | 8 mm |
Last viewed
Slotted flat-head screw ISO 1580, A2 stainless steel, plain
Hexagon Socket Head Cap Screw with centre, with low head DIN 6912, A2-070 stainless steel, plain
1C cutter knife with slider
Countersunk head screw with H cross recess ISO 7046-2, A2-70 stainless steel, plain
Vionaro accessories set for inner bezel
Safety glasses uvex pheos cx2 9198
VARIFIX® hammer head fastener standard fix Pre-assembled with nut and washer, zinc-plated
Hexagon nut, high profile, with clamping piece (non-metal insert) fine thread DIN 982, steel 8, zinc-plated, blue passivated (A2K)
Premium form A glass door set
Hexagon nut, heavy-duty design, inch