Ratchet combination wrench
Ratchet combination wrench, metric, retaining ring
RTCHCOMBIWRNCH-SWITCHABLE-SNAPRG-WS10MM
ZEBRA
Register now and access more than 125,000 products
Design: metric, straight
Drive: POWERDRIV bi-hexagon ring end with retaining ring, finely toothed, 72 teeth with reversing lever for clockwise and anti-clockwise rotation and 5° angle of rotation
Very rugged, strong ratchet tool for high tightening torques
Standard: max. torque according to DIN 899
Material: Chromium-vanadium steel
Surface: Basic body chrome-plated, matt satin finish, ring yellow-nickel-plated
Geometry: Jaw angle 15°, angled 15°, ring matt nickel-plated
Please note: This is a specialist tool, therefore the ring side is only suitable for loosening bolts to a limited extent.
Datasheets(X)
Loosen bolts using the open end and tighten using the ratchet mechanism on the ring end
 | |
Width across flats (SW) | 10 mm |
Length (L) | 159 mm |
Possible uses, 6-sided/12-sided metric | 10 mm |
Thickness of jaw (a1) | 5.3 mm |
Ring thickness (a2) | 7.3 mm |
Width of jaws (outside) (b1) | 20.5 mm |
External diameter of ring (d) | 20 mm |
Max. torque (F max.) | 59 Nm |
Material | Chrome-vanadium steel |
Surface | Chrome plated |
Last viewed
FLEXEN® cold rubber Plus S2 pipe insulation - 2 m
Disposable glove Ansell Microflex 92-134 Versatility
System bolt For system connector SV 20 E
Raised contersunk head tapping screw, C shape with PH recessed head DIN 7983, A4 stainless steel, plain. With cross recess.
Work dungarees
System assortment 4.4.1, t-handle screwdriver, TX
Safety shoes S1P Jalas 7108
Flat washer For hexagon head bolts and nuts
Conical countersink HSS Ruko DIN 335 plain ALU form C
Flat head tapping screw, type C with hexalobular socket