Ratchet combination wrench
Ratchet combination wrench, metric, retaining ring
RTCHCOMBIWRNCH-SWITCHABLE-SNAPRG-WS12MM
ZEBRA
Register now and access more than 125,000 products
Design: metric, straight
Drive: POWERDRIV bi-hexagon ring end with retaining ring, finely toothed, 72 teeth with reversing lever for clockwise and anti-clockwise rotation and 5° angle of rotation
Very rugged, strong ratchet tool for high tightening torques
Standard: max. torque according to DIN 899
Material: Chromium-vanadium steel
Surface: Basic body chrome-plated, matt satin finish, ring yellow-nickel-plated
Geometry: Jaw angle 15°, angled 15°, ring matt nickel-plated
Please note: This is a specialist tool, therefore the ring side is only suitable for loosening bolts to a limited extent.
Datasheets(X)
Loosen bolts using the open end and tighten using the ratchet mechanism on the ring end
 | |
Width across flats (SW) | 12 mm |
Length (L) | 172 mm |
Possible uses, 6-sided/12-sided metric | 12 mm |
Thickness of jaw (a1) | 6 mm |
Ring thickness (a2) | 8.2 mm |
Width of jaws (outside) (b1) | 24.6 mm |
External diameter of ring (d) | 22.6 mm |
Max. torque (F max.) | 91 Nm |
Material | Chrome-vanadium steel |
Surface | Chrome plated |
Last viewed
Turnbuckle sleeve produced from steel tube DIN 1478 (made from steel tube), steel L235 (S235JR), hot-dip galvanised (hdg)
Article sticker
Spring band clamp DIN 3021, shape B, W.TEC
Eye bolt with full thread DIN 444, steel 8.8, plain, shape LB
MS 5000 function key For locks and rotary knobs
Work jacket
Castellated nut, low profile with fine thread
Hexagonal bolt, with thread to head and fine thread ISO 8676, steel 10.9, zinc-nickel-plated, silver (ZNSHL)
Hexagonal bolt with thread up to the head ISO 4017, steel 10.9, zinc-plated, blue passivated (A2K)
Tapping screw, raised countersunk head