Ratchet combination wrench
Ratchet combination wrench, metric, retaining ring
RTCHCOMBIWRNCH-SWITCHABLE-SNAPRG-WS16MM
ZEBRA
Register now and access more than 125,000 products
Design: metric, straight
Drive: POWERDRIV bi-hexagon ring end with retaining ring, finely toothed, 72 teeth with reversing lever for clockwise and anti-clockwise rotation and 5° angle of rotation
Very rugged, strong ratchet tool for high tightening torques
Standard: max. torque according to DIN 899
Material: Chromium-vanadium steel
Surface: Basic body chrome-plated, matt satin finish, ring yellow-nickel-plated
Geometry: Jaw angle 15°, angled 15°, ring matt nickel-plated
Please note: This is a specialist tool, therefore the ring side is only suitable for loosening bolts to a limited extent.
Datasheets(X)
Loosen bolts using the open end and tighten using the ratchet mechanism on the ring end
 | |
Width across flats (SW) | 16 mm |
Length (L) | 208 mm |
Possible uses, 6-sided/12-sided metric | 16 mm |
Thickness of jaw (a1) | 7.2 mm |
Ring thickness (a2) | 9.9 mm |
Width of jaws (outside) (b1) | 33.2 mm |
External diameter of ring (d) | 30.3 mm |
Max. torque (F max.) | 179 Nm |
Material | Chrome-vanadium steel |
Surface | Chrome plated |
Last viewed
Air hose 3M BT-54
Locking bar With swivel handle
USB-A power supply and magnetic charging cable For rechargeable LED torches and head lamps with magnetic charging system
Stud with head, shape B
EPS profile thumbturn cylinder for keyed alike systems with original equipment
Hexagonal bolt with thread up to the head DIN 933, steel 8.8, zinc-plated, blue passivated (A2K)
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
ORS 142W AT Retrofit smoke switch
Hexagon head bolt with shank and fine thread ISO 8765, steel 10.9, plain
Steel panel For pallet shelves