Ratchet combination wrench
Ratchet combination wrench, metric, retaining ring
RTCHCOMBIWRNCH-SWITCHABLE-SNAPRG-WS24MM
ZEBRA
Register now and access more than 125,000 products
Design: metric, straight
Drive: POWERDRIV bi-hexagon ring end with retaining ring, finely toothed, 72 teeth with reversing lever for clockwise and anti-clockwise rotation and 5° angle of rotation
Very rugged, strong ratchet tool for high tightening torques
Standard: max. torque according to DIN 899
Material: Chromium-vanadium steel
Surface: Basic body chrome-plated, matt satin finish, ring yellow-nickel-plated
Geometry: Jaw angle 15°, angled 15°, ring matt nickel-plated
Please note: This is a specialist tool, therefore the ring side is only suitable for loosening bolts to a limited extent.
Datasheets(X)
Loosen bolts using the open end and tighten using the ratchet mechanism on the ring end
 | |
Width across flats (SW) | 24 mm |
Length (L) | 323 mm |
Possible uses, 6-sided/12-sided metric | 24 mm |
Thickness of jaw (a1) | 10 mm |
Ring thickness (a2) | 14.5 mm |
Width of jaws (outside) (b1) | 51.5 mm |
External diameter of ring (d) | 46.5 mm |
Max. torque (F max.) | 451 Nm |
Material | Chrome-vanadium steel |
Surface | Chrome plated |
Last viewed
Countersunk tapping screw, shape C with slot DIN 7972, A2 stainless steel
Hexagonal bolt with flange in accordance with MBN standard
Akura 44 profile thumbturn cylinder
4KS profile double cylinder
Twist drill bit HSCo DIN 338 type RN oxide
Hexagonal bolt with shank ISO 4014, A4-50 and A4-70 stainless steel, plain
Non-woven sanding belt For RED PERFECT® 3D stationary contact grinding machines
Nail UNS 104 In accordance with DIN EN 206
Slotted cheese head
Set screw hex socket and flat point