Ratchet combination wrench
Ratchet combination wrench, metric, retaining ring
RTCHCOMBIWRNCH-SWITCHABLE-SNAPRG-WS8MM
ZEBRA
Register now and access more than 125,000 products
Design: metric, straight
Drive: POWERDRIV bi-hexagon ring end with retaining ring, finely toothed, 72 teeth with reversing lever for clockwise and anti-clockwise rotation and 5° angle of rotation
Very rugged, strong ratchet tool for high tightening torques
Standard: max. torque according to DIN 899
Material: Chromium-vanadium steel
Surface: Basic body chrome-plated, matt satin finish, ring yellow-nickel-plated
Geometry: Jaw angle 15°, angled 15°, ring matt nickel-plated
Please note: This is a specialist tool, therefore the ring side is only suitable for loosening bolts to a limited extent.
Datasheets(X)
Loosen bolts using the open end and tighten using the ratchet mechanism on the ring end
 | |
Width across flats (SW) | 8 mm |
Length (L) | 140 mm |
Possible uses, 6-sided/12-sided metric | 8 mm |
Thickness of jaw (a1) | 4.6 mm |
Ring thickness (a2) | 6.5 mm |
Width of jaws (outside) (b1) | 16.2 mm |
External diameter of ring (d) | 16.4 mm |
Max. torque (F max.) | 35 Nm |
Material | Chrome-vanadium steel |
Surface | Chrome plated |
Last viewed
Hexagonal bolt with shank
Hexagonal bolt with thread up to head for pressure container construction DIN EN ISO 4017, A2 stainless steel
Locking system DUAL
Screw-on plate For base height adjuster type L
Ice scraper with handle, Hobby With stable edge for effortless removal of ice
Safety boots, S1
High-visibility jacket
Hexagon nut with clamping piece (non-metal insert) ISO 7040, steel 8, zinc-plated, thick-film passivated (VZD)
Slotted cheese head DIN 84, brass, plain
Bomber jacket