Welcome to Würth Aerospace Solutions For trade customers only

Ratchet strap For car transport

Ratchet strap swivel hook Plus car transport
STRP-RTCH-CARTRAN-LC2500-W50MM-L2,3M

Art.-no. 071392 313
EAN 4058794754926

Prices for customers after login
Ratchet strap For car transport

Art.-no. 071392 313

Prices for customers after login
Quantity
PU
x 1 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

Three-point straps with strap controller. For radial lashing down as required by automotive manufacturers. Pressure ratchet

2-piece, closed lashing strap system according to DIN EN 12195-2



Swivel hook rotatable 360° and flexible in use



Label colour blue, attached internally at the end of the release



Lashing strap must not come into contact with the tyre, so our strap controller is 100 cm long



Good distribution of pre-tensioning forces over the entire strap


Strap controller, on the strap side with PES material



Quick and secure attachment of the van lashing strap.


Rubber textured on tyre side. Full-surface strap attachment to the tyre via controller

Notice

In the case of alternative lashing, direct lashing or lashing straps with loops, this may have a negative impact on the wheel bearings and/or wheel rims.

  • In accordance with DIN EN 12195-2

  • Complies with the guidelines pursuant to VDI 2700 Sheet 8.1 at 35 mm

  • Complies with the guidelines pursuant to VDI 2700 Sheet 8.1 / 8.2 at 50 mm
Product information

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area
  • LC 1500 daN can be used to secure vehicles up to an instantaneous mass of 4000 kg

  • LC 2500 daN can be used up to 20,000 kg

Design

Two-piece

Width (B)

50 mm

Length (L)

2.3 m

Length of belt controller

100 cm

Max. elongation lashing strap

4 %

Permissible LC tensile force when pulled directly

2500 daN

Pre-load

250 daN

Hand force with ratchet

50 daN

Material

PES - Polyester

Shape of the hook

Swivel hook

Label inside

No

Colour

Red

Standards

EN 12195-2

Min./max. temperature conditions

-40 to 100 °C

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information