Ratchet strap in accordance with the Association of German Engineers' standard VDI 2700 sheet 8.1/8.2 for car transport - STRP-RTCH-CARTRAN-LC1500-W35MM-L2,8M

Ratchet strap in accordance with the Association of German Engineers' standard VDI 2700 sheet 8.1/8.2 for car transport

Name: Ratchet strap in accordance with the Association of German Engineers' standard VDI 2700 sheet 8.1/8.2 for car transport
Brand: Würth
SKU: 071392 316

Ratchet strap swivel hook Plus car transport
STRP-RTCH-CARTRAN-LC1500-W35MM-L2,8M

Art.-no. 071392 316

EAN 4065746999830

All versions

Similar products

Prices for customers after login

Ratchet strap in accordance with the Association of German Engineers' standard VDI 2700 sheet 8.1/8.2 for car transport

Art.-no. 071392 316

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service:

Three-point straps with strap controller. For radial lashing down as required by automotive manufacturers. Pressure ratchet

2-piece, closed lashing strap system according to DIN EN 12195-2

Swivel hook rotatable 360° and flexible in use

Label colour blue, attached internally at the end of the release

Lashing strap must not come into contact with the tyre, so our strap controller is 100 cm long

Good distribution of pre-tensioning forces over the entire strap

Strap controller, on the strap side with PES material

Quick and secure attachment of the van lashing strap.

Rubber textured on tyre side. Full-surface strap attachment to the tyre via controller

Notice

In the case of alternative lashing, direct lashing or lashing straps with loops, this may have a negative impact on the wheel bearings and/or wheel rims.

In accordance with DIN EN 12195-2

Complies with the guidelines pursuant to VDI 2700 Sheet 8.1 at 35 mm

Complies with the guidelines pursuant to VDI 2700 Sheet 8.1 / 8.2 at 50 mm

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

LC 1500 daN can be used to secure vehicles up to an instantaneous mass of 4000 kg

LC 2500 daN can be used up to 20,000 kg

Design	Two-piece
Width (B)	35 mm
Length (L)	2.8 m
Length of belt controller	130 cm
Max. elongation lashing strap	4 %
Permitted tensile force LC in the strapping	1500 daN
Pre-load	330 daN
Hand force with ratchet	50 daN
Product certification	TÜV SÜD Product Service GmbH (München)
Material	PES - Polyester
Shape of the hook	Swivel hook
Colour	Red
Standards	EN 12195-2
Min./max. temperature conditions	-40 to 100 °C