Ratchet strap, two-part With tailboard claw
Ratchet strap, two pieces, tailboard claw
STRP-RTCH-2PC-BOARDWALLCLAW-50MM-3M
Register now and access more than 125,000 products
- Can also be used in combination with intermediate wall locks and clamping bars
- Fast lashing of goods and easy handling thanks to automatic clamping of the tailboard claw
- No lashing points or lashing rails required
- No damage to the tailboard due to rubberised claw
- Pressure ratchet
Additionally, place the goods to be secured on non-slip mats
In accordance with EN 12195-2
GS-approved
Datasheets(X)
For load securing on flatbed vehicles or vehicles with sufficient tailboard strength
Design | Two-piece |
Width (B) | 50 mm |
Length (L) | 3 m |
Fixed end length | 0.25 m |
Loose end length | 2.75 m |
Max. elongation lashing strap | 5 % |
Permitted tensile force LC in the strapping | 500 daN |
Permissible LC tensile force when pulled directly | 250 daN |
Hand force with ratchet | 50 daN |
Product certification | GS certified safety |
Material | PES - Polyester |
Shape of the hook | board wall clamp |
Label inside | No |
Colour | Red |
Standards | EN 12195-2 |
Min./max. temperature conditions | -40 to 100 °C |
Last viewed
Twist drill bit HSS DIN 1897 type RN
Lightweight clamping pin
Wedge and wheel lock nut
Twist drill bit HSS DIN 338 type RN 130°
Wedge lock washer Nord-Lock, narrow shape (NL)
Weatherproof trousers
Wood screw, DIN 96 A2 Half moon head with slot
High-end power LED pocket torch WTX3
Lightweight construction anchor W-KL
Feather key, high profile DIN 6885, steel C 45 K, plain, shape A