Reducer, brass Metric according to EN 60423
Reducer, metric, brass
REDUC-BRS-(E2J)-(M32-M20)
Register now and access more than 125,000 products
- To reduce a threaded or through hole to a smaller thread size
- Made in Germany
Connection thread | M32 x 1.5 |
Connection thread (after reduction) | M20 x 1.5 mm |
Outer diameter | 39.0 mm |
Thread length (metric thread) | 8.0 mm |
Height | 11.5 mm |
Min./max. temperature conditions | -20 to 200 °C |
Material | Brass |
Surface | Nickel plated |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Square solid spindle 8 mm
Trough panel plug-in wall
Premium UV leak detection additive
Extension tube for deep box wrenches
Divider assortment with compartment rails and compartment dividers for system dimensions 16.6
Twist drill bit HSS DIN 1869 R1 type RN
Open-end wrench with square insert shank 14x18 mm
Spacer stud, polyamide, hex, F/F
Hexagonal bolt with shank DIN 931, zinc plated 10.9 steel with thick-layer passivation (VZD)
Power pack LI-CV 18 V with charger and 2 x batteries
