Reducing nipple, imperial thread EN10242 N4 shape II, hot-dip galvanised malleable iron
EN10242 N4 mall. cast iron hot dip galv. shape II
FITT-RED-PCE-EN10242-N4-V-R2X1
Register now and access more than 125,000 products
Datasheets(X)
 | |
Length | 37 mm |
Nominal width 2 | 1 in |
Material | Malleable cast iron |
Surface | Hot dip galvanized |
Length 4 | 20 mm |
Last viewed
Cable grommet, double-sided
System case 4.4.2 transparent
Threaded fitting DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 4.8, blue passivated
Hole saw Ruko carbide flat cut
Combination wrench, inch with POWERDRIV®
Hexagon head bolt with shank and fine thread ISO 8765, steel 10.9, plain
Particle board screw
GEFU® thread-rolling screw With Taptite 2000® thread, flattened half round head with collar and hexalobular drive
Hexagonal bolt with thread up to the head ISO 4017, steel 10.9, plain
Hexagon nut, low profile, with clamping piece (non-metal insert) DIN 985, steel I6I/I8I, zinc-plated, blue passivated (A2K)