Reducing ring for diamond cutting disc Klingspor DZ 100 RR
Reducing ring DZ 100 RR Klingspor
REDURG-KLINGSPOR-353265-25,4X2X22,23MM
Register now and access more than 125,000 products
The cutting disc is converted to match a suitable hole in a quick and affordable way. The knurled reducing ring DZ 100 RR fits exactly into the hole of the cutting disc - allowing the bore diameter to be reduced quickly and with minimum effort. The DZ 100 RR reducing ring can be used to clamp the cutting discs into the machine with perfect precision.
The outer edge of the DZ 100 RR reducing rings is finely toothed. This prevents the ring from slipping when clamped in the cutting disc and ensures better adhesion. Before clamping, the reducing ring is pressed or driven into the desired cutting disc. When selecting a reducing ring, it should be noted that the ring needs to be thinner than the working material and is only used for centring. Otherwise, the disc will not be properly fixed in place, which could cause it to loosen or even break.
Datasheets(X)
Suitable for bore diameter | 22.23 mm |
Diameter | 25.4 mm |
Last viewed
Straight male fitting ISO 8434-1, zinc-nickel-plated steel, BSPP male thread with metallic sealing edge, shape B
Half round head safety screw with hexagon socket and pin Similar to ISO 7380-1, A2-070 stainless steel, plain
W-VIZ-A anchor rod, zinc-plated steel for W-VIZ/S injection systems (concrete)
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, plain
Cylindrical pin, hardened ISO 8734 steel plain, type A hardened, tolerance class m6
Hexagon nut, low profile with fine thread DIN 439, steel, zinc-plated blue passivated (A2K)
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, zinc-plated, blue passivated (A2K)
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Double securing shackle FIXB 227 With pre-assembled 27 mm nail type HN 101
Akura 44 profile double cylinder for keyed alike systems with original equipment