Reinforced fibre FIBERFLEX
Mortar additive FIBERFLEX
MORTADD-FIBERFLEX-PP-6MM-140G
Register now and access more than 125,000 products
Water-soluble bag
- Quick and easy to use, no waste
- Simply throw the bag into the mixer together with the mixture
Improves the plastic properties of the mixture
- Increases the compressive, tensile and bending strength
- Reduces waste and increases the durability of the finished product
- Increases resistance to impacts and abrasion
- Reduced bleeding and better distribution of materials
Evenly distributes the tension caused by plastic and hydraulic shrinkage
- Reduces cracks
- Improves the appearance and watertight properties of the cement mixture
- Increased resistance to freezing/thawing and other weather conditions
| Properties of fibre-reinforced concrete | ||
| Mix design used: | Mixture with additives➔ | Permeability (CRC C48) -45 % Abrasion resistance (ASTM C944) +20 % Impact resistance +10 % Cracking reduction -80 % |
| Concrete: 300 kg/m3 | ||
| Natural sand: 700 kg/m3 | ||
| Crushed sand: 70 kg/m3 | ||
| Gravel: 1080 kg/m3 | ||
| water: 180 kg/m3 |
Datasheets(X)
Plaster
Thin slabs and infill panels
Commercial and industrial flooring
Screed for flooring
Prefabricated elements
Vessels, wells, pipes, fences, road barriers etc.
Reinforced and non-reinforced concrete
Exposed concrete
Add Fiberflex to aggregates or put in a cement mixer along with a ready-made mixture. Do not add water. Follow the guidelines regarding the composition of the mixture and if necessary, adjust the dosage of superplasticiser admixture, if using. The ideal ratio between the fibre length and the thickness of the finished product is about 1:3
Product weight (per item) | 1.000 g |
Last viewed
Safety boots, S2
ASSY®plus VG 4 CSMP construction screw Steel zinc plated full thread countersunk milling pocket head
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Assembly glove Economy
Hexagonal bolt with shank DIN 931, steel 12.9, plain
wSafe® 2000 pneumatic safety coupling With male thread
Safety boots, S2
GEFU® thread-rolling screw With Taptite 2000® thread, countersunk head with hexalobular drive
Interior trim clip, type 2
Cylindrical roller bearing FAG