Renovation hinge, screw-on/drill-in
Renovation hinge to screw on/drill in
RENVHNGE-SCR/DRL-(ZN)-D15MM
Register now and access more than 125,000 products
Delivery without fastening screws!
Specified dimensions not binding. Subject to technical changes.
Datasheets(X)
For internal doors during renovation
 | |
Area of application | Exhibition stand construction |
Suitable for | Wooden block frame |
Material | Steel |
Surface | Zinc plated |
Roll diameter | 15 mm |
Mandrel diameter | 10 mm |
DIN direction | DIN R/L |
Load capacity with 2 hinges | 40 kg |
Load capacity with 3 hinges | 40 kg |
Min. flashover strength | 15 mm |
Suitable for min./max. door width | 400-1000 mm |
Number of drill holes | 3 PCS |
Screw diameter | 4.5 mm |
Length of tenon | 50 mm |
Thread length | 50 mm |
Last viewed
Hand tap, third tap HSS DIN 352
Vehicle cable round cable (hose line) FLRYY
Cylindrical pin, unhardened DIN 7, A4 stainless steel, plain
Worktop support for workshop trolley ULTIMATE
Small saw blade
ASME B18.21.1 steel zinc-plated yellow
Adjustable straight sealing cone male fitting ISO 8434-1, zinc-nickel-plated steel, metric male thread with o-ring
Slotted countersunk head screw DIN 963, 4.8 steel, plain
Tabletop plug socket strip TSL-1
Wire cable terminal With fork