Repair asphalt Premium

Name: Repair asphalt Premium
Brand: Würth
SKU: 0890368

Premium repair asphalt
REPASPH-PREMIUM-G0/5-25KG

Art.-no. 0890368

EAN 4052703551156

All versions

Prices for customers after login

Repair asphalt Premium

Art.-no. 0890368

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service:

Specification

For permanent repairs of potholes and damaged areas on roads of all stress classes

Weather-proof and thus usable all year round, can also be applied in snow and rain

Quick application

No priming necessary

Direct application possible

Immediate traffic approval

Can be covered with hot tarmac

Suitable for water protection zones 2 + 3

Notice

Premium repair tarmac hardens slowly. Hardening depends on the ambient temperature and compression. The more the material is compressed (by machinery or by driving over it), the faster premium repair tarmac hardens.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Application

Application area

Premium repair tarmac is a ready-to-use repair tarmac with a long storage life that has been specifically developed for repairing road surfaces (tarmac or concrete), for lasting repairs of damaged areas on roads, paths, squares of all stress classes in accordance with RStO (guidelines for standardising road and traffic).

Suitable for repairing small and larger potholes as well as the final top layer for smaller road breaks when laying cables or smaller cuts in the road surface. Can also be used for makeshift exits or wheelchair ramps.

Instructions

1. Preparation:

Sufficient structural strength of the substrate is necessary to ensure that the repair work lasts. Clean the damaged area carefully. Dirt, standing water, ice and loose parts must be completely removed. To ensure that the minimum layer thickness of 15 mm can be achieved, rework the damaged area, if necessary, until this depth is reached; this is so that a clear rim or wedge compared to the surrounding asphalt can be achieved.

2. Application:

Premium repair asphalt can be directly applied out of the bucket into the damaged spot, without needing to mix the repair asphalt. It is recommended that the bucket be turned on its head before application to ensure that the bonding agent can spread out and an even consistency is achieved. Fill in a little more than is necessary for an even surface. Then compact with a shovel, tamper or plate compactor. Moisten the tamper or tool with water when doing so. For quicker traffic approval/utilisation, it is recommended that the area be compacted mechanically and sand be distributed over the repaired area. Premium repair asphalt is fully resistant immediately after application. The higher the compression (also by driving over it), the quicker the material hardens. Do not use in areas where high point and rotational loads can be expected. Opened products can even be used weeks later. Just make sure you close the bucket tightly. It is recommended that the product be used up within 12 months.

Minimum thicknesses and recommendations:

Grit 0/3, at least 10 mm to 25 mm

Technical information

Weight of content	25 kg
Grid size	0-5
Chemical basis	Bitumen
Colour	Black
Min./max. processing temperature	10 to 20 °C
Smell/fragrance	Characteristic
Min. ambient processing temperature	-20 °C
Max. ambient processing temperature	40 °C
Min. processing temperature	10 °C
Max. processing temperature	20 °C
Density	2.2 g/cm³
Density conditions	at 20°C
Application quantity in weight/area	18 kg/m²
Shelf life from production	12 Month
Conditions to maintain shelf life from production	dry, lying and dust free storage area, protected from UV rays
Min./max. material thickness	15-35 mm

Documents

Product information

Datasheets (1)

Safety data sheet

Certificates/ Documents (0)

Accessory

Additive article:

Product

Description

Quantity

Price
/PU

Bricklayers trowel, forged Suitable even for the most demanding tasks, since handle and blade are forged from one piece

BRCKLRTRWL-(S-NECK)-FORGED-B160MM

Art.-no. 0695943100

Suitable even for the most demanding tasks, since handle and blade are forged from one piece.

x 1 pcs

Bricklayers trowel, forged Suitable even for the most demanding tasks, since handle and blade are forged from one piece

BRCKLRTRWL-(S-NECK)-FORGED-B180MM

Art.-no. 0695943101

Suitable even for the most demanding tasks, since handle and blade are forged from one piece.

x 1 pcs

Industrial broom, Arenga For fine and coarse dirt outdoors

BRM-HALL-ARENGA-L400MM

Art.-no. 0695943961

x 1 pcs

Industrial broom, Arenga For fine and coarse dirt outdoors

BRM-HALL-ARENGA-L600MM

Art.-no. 0695943962

x 1 pcs

Street broom, Elaston For coarse dirt outdoors

STREBRM-ELASTON-L400MM

Art.-no. 0695943963

x 1 pcs

Street broom, Elaston For coarse dirt outdoors

STREBRM-ELASTON-L500MM

Art.-no. 0695943964

x 1 pcs

Industrial broom For fine dust indoors

BRM-HALL-COCO-L400MM

Art.-no. 0695943965

For fine dust indoors

x 1 pcs

Street broom, Piassava

STREBRM-PASSAVA-L400MM

Art.-no. 0695943966

For coarse dust and dirt. Also suitable for slurrying.

x 1 pcs

Industrial broom For fine floors

BRM-HALL-INDUSTRIAL-L600MM

Art.-no. 0695943968

x 1 pcs

Street broom, Elaston For coarse dirt outdoors

STREBRM-ELASTON-L600MM

Art.-no. 0695943969

x 1 pcs

Universal thinner For almost all solvent-based paint and primer materials

THINNER-UNI-30LTR

Art.-no. 082344030

x 1 pcs

Titanium welding burner

WELDTRCH-F.SLDRTL-TI-L850-D50

Art.-no. 098489816

For drying, thawing and laying bituminous welding sheets

x 1 pcs

Titanium welding burner

WELDTRCH-F.SLDRTL-TI-D60-L500

Art.-no. 098489818

For drying, thawing and laying bituminous welding sheets

x 1 pcs

Multi-purpose torch

UNIBRN-300ML

Art.-no. 0984900600

Including torch attachment for clean and residue-free combustion

x 1 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).