Repair resin EXTREME II For spiderweb cracks (vis 20 cps)

Name: Repair resin EXTREME II For spiderweb cracks (vis 20 cps)
Brand: Würth
SKU: 0890014

Repair resin, Extreme II
REPRSN-WNDWREP-(EXTREME II)

Art.-no. 0890014

EAN 4046778953403

All versions

Similar products

Prices for customers after login

Repair resin EXTREME II For spiderweb cracks (vis 20 cps)

Art.-no. 0890014

Prices for customers after login

Quantity

x 10 pcs

Exclusively for trade customers

Login/Register
Call customer service:

Repair resin, with extremely low viscosity, for use at low temperatures and with extremely fine cracks.

The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

Repair resin for the repair of stone chips in windscreens.

Weight of content	0.4 g
Smell/fragrance	Ester-like
Colour	Green

Suitable glove:

Product

Description

Chemical protective glove, Butyl

Description:

Permeation level: 6

Gas-tight and resistant to exhaust gases produced by combustion processes

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 1

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 2

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.