Retouching paint box

Name: Retouching paint box
Brand: Würth
SKU: 08903051

Retouching box
RETCHBOX-12PCS

Art.-no. 08903051

EAN 4024835074162

All versions

Prices for customers after login

Retouching paint box

Art.-no. 08903051

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service:

For retouching repaired surface damage.

Good colour adjustment and coverage

Mixing the colours together achieves a wide range of colours

Can be painted over

Non-fading and resistant to weathering

Suitable for indoor and outdoor use.

Good adhesion

Excellent adhesion to painted, plastic and metal surfaces.

Notice

No adhesion to soft PVC.

The above application instructions are recommendations given on the basis of our own tests and experience. We recommend that you carry out your own tests before use. Due to the great variety of different applications and storage and processing conditions, we cannot guarantee a particular application result. We will not accept legal liability for any advice or technical information provided by our free customer hotline unless this advisory service and/or technical information is part of the contractually agreed performance owed by us, or the customer service employee acted willfully or intentionally. We guarantee the consistent quality of our products and reserve the right to make technical changes and improvements.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

Used for accurate retouching work using the brush. For pre-retouching work when filling scratches and holes with RSM 2-component repair filler. Can be adjusted from glaze to coverage setting. Suitable for all wooden and decorative surfaces. Recommended for indoor and outdoor use.

Instructions

Dissolve the paints with the mixing thinner provided and, where necessary, mix with other colours on the inside of the lid and/or a separate transparent film to obtain the required colour. Apply the paint with the brush supplied. Do not work when the surface is too wet.

Seal after staining. For more information, please refer to the technical data sheet.

Chemical basis	Nitroacrylate
Colour	Beige, Blue, Brown beige, Yellow, Grey brown, Chestnut brown, Copper brown, Clay brown, Red, Chocolate brown, Black, White

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 1

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 1

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.