Retouching wax

Name: Retouching wax
Brand: Würth
SKU: 0890403308

Retouching wax
RETCHWAX-FUS-WALNUT-ANTIQUE

Art.-no. 0890403308

EAN 4052712348822

All versions

Specification

For filling and at the same time retouching fine scratches, small holes and abrasions.

Large selection of colours for a wide range of different wood colour tones

Simple application enables fast and easy filling of small scratches, cracks and open joints

Inexpensive repair work instead of replacement or costly new surface treatment of the whole surface

Low mechanical strength

Notice

Please note that wood has a natural colour which is dependent on many different factors (e.g. origin, exact type of tree, surface treatment etc.). Therefore, an inconspicuous touch-up can never be carried out with a single wax colour.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Application

Application area

For filling and at the same time retouching fine scratches, small (nail) holes and abrasions on painted natural wood and/or plastic-coated surfaces. Recommended for indoor use and for surfaces not exposed to loads.

Instructions

Rub in the retouching wax perpendicular to small scratches while applying light pressure. Wipe off excess wax with the plastic plane (art. no. 0890 305 30), keeping it flat against the surface and, work in a circular motion. Then the wax surface should be sealed with a clear varnish (art. no. 08931882/08931883).

For more information, please refer to the technical data sheet.

Technical information

Chemical basis	Wax
Colour	Walnut
Density	0.92 g/cm³
Softening point	50 °C
Conditions for softening point	in accordance with ISO 2207
Min. dripping point	60 °C
Dripping point conditions	in accordance with DIN 51801
Min. flashing point	180 °C
Max. viscosity	100 mPas
Viscosity conditions	at 120°C
Substrates with good adhesion	Wood, Plastic, Paper foil
Water-soluble	No
Shelf life from production	4 Years