Retro-reflective tape for segmented tarpaulins
Retro-reflective tape for segmented tarpaulins
WARNMRK-PRISMFILM-VC104+-TARPA-SA-WH-50M
Register now and access more than 125,000 products
With ECE-approval, can be used without special permit
Complies with ECE 104 class C
Self-adhesive
Very thin single-layer film:
- Not damaged by water, fuel, or high-pressure cleaning
- Can be easily bonded around corners
- No separate sealing of edges necessary
Please note the relevant European and national guidelines for installation of contour markings.
Datasheets(X)
For tarpaulins
Attachment to newly registered vehicles has been compulsory since 10.10.2007
- Vehicles for passenger transport M2 – car with more than 9 seats M3
- Vehicles for goods transport N3 / N4 – LCV with max. weight exceeding 7.5 t
- Trailers and semi-trailers (O)
O3 – trailers with maximum weight of 3.5 t to 10 t
O4 – trailers with total weight exceeding 10 t
Attachment to existing vehicles is permitted
- Vehicles for passenger transport M2 – car with more than 9 seats M3
- Vehicles for goods transport (N)
N1 / N2 – LCV with maximum weight up to 7.5 t
N3 / N4 – LCV with maximum weight exceeding 7.5 t
- Trailers and semi-trailers (O)
O2 – trailers with maximum weight of 0.75 t to 3.5 t
O3 – trailers with maximum weight of 3.5 t to 10 t
O4 – trailers with total weight exceeding 10 t
Attachment to existing vehicles is not permitted
- Vehicles for passenger transport M1 – car with max. 9 seats
- Trailer and semi-trailer O1 – trailer with max. weight up to 0.75 t
Width | 50 mm |
Length | 50 m |
Colour | White |
Last viewed
Divider assortment With system boxes for system dimensions 12.6
Work jacket
Hexagonal bolt, with thread to head and fine thread DIN 961, steel 8.8, zinc-plated, blue passivated (A2K)
Cut protection glove W-410 Level E
Countersunk head screw with recessed head, H DIN 965, steel 4.8, plain
Key, high profile
Work jacket
Adapter M14/22.23
HSS-Co8 end mill, short, centre-cutting DIN 844K
Hexagonal bolt with shank